Back to index Back to index Home Home 2CV restoration -
Citroën's 2CV users manual -
Page 03
<< Page 02 Page 04 >>
DOORS, BOOT, BONNET... (depending on equipment)

Bonnet (Fig. 6)
  • Raise the lever situated under the centre part of front bumper (1) to disengage the saftey catch (2).
  • Raise the bonnet and insert the end of the stay (3) into its housing in bonnet (5).
  • Before closing the bonnet, do not forget to replace the stay in the notch of its support (4).
Fuel filler  
  • It is located on the upper part of R.H. rear wing.
To open: press cap and turn counterclockwise.
To close: turn clockwise until the cap clicks home.
Page 03 Fig. 04

Fig. 4 - Rear boot door
1 - Stay
2 - Support

Page 03 Fig. 05

Fig. 5 - Rear boot door
3 - Support
4 - Hook

Page 03 Fig. 06

Fig. 6 - Opening the bonnet
1 - Location of the release lever
2 - Safety catch
3 - Stay
4 - Stay support notch
5 - Bonnet nose


Back to top Back to top Back to index Back to index << Page 02 Page 04 >>